What Size Solar Panel Do I Need to Charge a 12V Battery?
What size solar panel do you need to charge a 12V battery? It depends on the battery's size and how fast you want it full — but the practical answer for the most common case, a 12V 100Ah battery, is a 300 to 400W solar setup for a full recharge in one good day. A 20 to 50W panel will only maintain it. Here is the formula and the table for every battery size.
The formula
Solar panel watts = battery energy (Wh) ÷ peak sun hours ÷ system efficiency
First convert the battery to watt-hours: volts times amp-hours. A 12V 100Ah battery stores 1,200Wh. Then divide by your peak sun hours (hours of full-strength sun — 4 to 6 in most of the US, 3 to 4 in the Northwest) and by system efficiency (use 0.75 to 0.8 to be realistic — heat, dust, angle, and controller losses all take a cut).
For a 12V 100Ah battery with 5 peak sun hours at 80% efficiency: 1,200 ÷ 5 ÷ 0.8 = 300W. In a 4-sun-hour location: 1,200 ÷ 4 ÷ 0.8 = 375W. That is why 300 to 400W is the honest range.
Sizing table for 12V batteries
- 12V 20Ah (240Wh): maintain with 20–50W; daily recharge with 80–100W
- 12V 50Ah (600Wh): maintain with 50–100W; daily recharge with 150–250W
- 12V 100Ah (1,200Wh): maintain with 100–200W; daily recharge with 300–500W
- 12V 200Ah (2,400Wh): maintain with 200–300W; daily recharge with 600–900W
"Maintain" means keeping a stored battery topped up against self-discharge — a 5 to 20W panel with a controller can do that for a small battery. "Daily recharge" means refilling it from empty in one day of sun. Most people need something in between: topping up what they used overnight. If you use half the battery each day, you need half the daily-recharge number.
The charge controller rule
Never connect a panel straight to a battery — you need a charge controller to regulate voltage and stop overcharging. The controller must handle the array's current: panel watts divided by 12V. A 300W array needs at least a 25A controller (300 ÷ 12 = 25A), so a 30A MPPT is the right fit. MPPT controllers are significantly more efficient than PWM — up to 30% more energy from the same panels — and they are worth it above about 200W of solar. Our MPPT controllers start at 30A and cover 12V, 24V, 36V, and 48V systems.
Common mistakes
- Sizing for label watts, not real watts. Panels rarely produce their rated output. Budget 75% of label in your planning.
- Forgetting the load. If you are using power while charging, the panels must cover the load and recharge the battery. Add daytime use to the battery energy before dividing.
- Using a panel that is too small. A 100W panel on a 100Ah battery gives about 8 amps in full sun — it would take two full sunny days to refill an empty battery, and that assumes no loads at all. A 100W panel is a maintainer, not a charger, for a battery that size.
- Ignoring the battery type. Lead-acid batteries only give you 50% usable capacity and charge slower near full, so they need more solar time. LiFePO4 charges faster and uses nearly all its capacity — the same panel refills a lithium battery in roughly half the time.
Fixed panels vs portable panels
Fixed panels — rigid, mounted on a roof, rack, or ground mount — are the right choice for a battery that stays in one place: a cabin, a shed, a home system. They work every day without attention, and a tilted fixed mount outperforms a flat one by 10 to 15%. Portable panels — folding suitcase panels with a built-in stand — are the right choice for a battery that moves: an RV, a boat, a camping setup. You aim them at the sun, and you can park the vehicle in the shade while the panel sits in full sun. The trade-off is setup time and a higher price per watt. Many of our customers end up with both: fixed panels at home, and a portable panel for the road. A 100W folding panel with a 30A controller is a complete charging kit that fits in a trunk.
How long will the panel last?
A quality rigid solar panel is warrantied for 25 years and degrades about 0.5% per year — after 25 years it still makes about 85% of its label output. The panel will outlast the battery several times over. Flexible panels degrade faster, roughly 1% per year, and last about 10 to 15 years. The panel is a one-time purchase; the battery is the part you will replace. Size the panel for the battery you will own in five years, not just the one you own today.
The bottom line
Convert the battery to watt-hours, divide by your sun hours and 0.8 efficiency, and you have your panel size. For the common 12V 100Ah battery, that is 300 to 400W of solar with a 30A MPPT controller. Browse solar panels and kits at Nova Bliss — our 100W panel kit with controller is a good start for small batteries, and we can size a full array for any battery. Call or text +1 (228) 696-3541. Every order ships free across the US with 1–2 week delivery and 30-day returns. You do not have to go off-grid to save money with free power — a battery kept full by the sun is a bill you never pay.