10–30 kW permanent magnet generators
For DIY wind, micro-hydro and off-grid power
|

Aninerel 51.2V 100Ah LiFePO4 Battery — 5.12kWh Solar Storage

Color

Description

This Aninerel 51.2V 100Ah LiFePO4 battery is a lithium iron phosphate battery that stores 5.12kWh of solar energy for compatible home solar and off-grid systems, with CAN and RS485 communication for supported inverters and a built-in 100A battery management system. It is designed for stationary energy storage, not as a starter battery.

Key specifications

  • Nominal voltage: 51.2V; capacity: 100Ah (5,120Wh)
  • Built-in 16S 100A BMS; maximum charge and discharge current: 100A, as listed
  • Communication: CAN and RS485 for supported inverters and monitoring equipment
  • Listed cycle life: over 6,000 cycles at 0.2C, to 80% end-of-life capacity
  • Charge voltage: 58.4V plus or minus 0.4V
  • Dimensions: 483 x 460 x 140mm; approximate gross weight: 53kg
  • Brand: Aninerel, as listed

Who it is for

This battery suits home solar and off-grid systems that run on a 48V-class battery bank and need about 5kWh of usable storage per unit. The CAN and RS485 ports let supported inverters read the battery state directly, which helps the system charge and discharge it correctly. Check that your inverter accepts a 51.2V nominal battery and the same communication protocol before ordering.

What to check before you order

The listing also shows 24V and 48V options, and the capacity and current ratings for those options are not stated in full in the listing, so check the exact variant details before ordering. The supplier lists an IP5 rating for dust and water resistance, which is not a complete protection rating, so verify the enclosure rating and keep the battery in a suitable location. Do not connect multiple batteries unless the manufacturer approves the exact wiring configuration.

Frequently asked questions

Will this battery work with my solar inverter?

It works with inverters that accept a 51.2V nominal LiFePO4 battery and, for communication, support CAN or RS485. Confirm your inverter battery voltage range, protocol and current limits before ordering, and check the installation clearances for a 53kg unit.

Free shipping on every order, delivery in 1-2 weeks, and returns within 30 days if the battery is not the right fit for your system.

Related products and guides